LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 499 (Exhaust System) >> Exhaust System Removal/Installation [BP With TC] >> HO2S (Front) Removal Note

HO2S (Front) Removal Note

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the dipstick and pipe. (See OIL PAN REMOVAL/INSTALLATION [BP WITH TC] .)
  2. Disconnect the HO2S (front) connector.
  3. Install the SST  .
  4. Remove the HO2S (front).
    Fig 1: Disconnecting HO2S (Front) Connector
    G03637856Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals