LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 498 (Fuel System) >> Fuel Tank Removal/Installation >> Breather Hose, Evaporative Hose Installation Note

Breather Hose, Evaporative Hose Installation Note

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Fit each hose onto the respective fittings within specification, and install clamps as shown.
    Fig 1: Fitting Hose Within Specification
    G03637819Courtesy of MAZDA MOTORS CORP.