WASTEGATE Actuator Inspection (BP With TC)
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the vacuum hose connected to the wastegate actuator port.
- Connect the SST to the wastegate actuator.
- Check that the rod moves when supply compressed air.
- If there is any malfunction, replace the turbocharger.
- If there is no malfunction, verify that there is no malfunction such as incorrect connection or damage in the vacuum hose.
Specification
- 65-70 kPa {0.67-0.71 kg/cm2, 9.5-10.1 psi}