Intake-Air System Removal/Installation (BP With TC): Notes
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- A hot engine and intake air system can cause severe burns. Turn off the engine and wait until all components are cool before removing the intake air system.
- Fuel line spills and leakage from the pressurized fuel system are dangerous. Fuel can ignite and cause serious injury or death and damage. Fuel can also irritate skin and eyes. To prevent this, always complete the "Fuel Line Safety Procedure". (See BEFORE SERVICE PRECAUTION .)
- Disconnect the negative battery cable.
- Drain the engine coolant from the radiator. (See ENGINE COOLANT REPLACEMENT .)
- Remove the under cover.
- Remove in the order indicated in the table.
- Install in the reverse order of removal.
- Complete the "AFTER SERVICE PRECAUTION". (See AFTER SERVICE PRECAUTION .)