Idle Air Control (IAC) Valve Removal/Installation
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable.
- Remove the air hose and the throttle body. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION (BP) .) (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION (BP WITH TC) .)
- Disconnect the IAC valve connector.
- Remove in the order indicated in the table.
- Install in the reverse order of removal.