Crossmember Bolt and Nut Removal Note
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Support the crossmember using a transmission jack.
- Remove the crossmember bolts and nuts.CAUTION:
- Do not damage the brake hoses, A/C pipes and P/S pipes when lowering the crossmember.
NOTE:- Lower the crossmember after separating the steering intermediate shaft from the pinion shaft.
- Lower the crossmember until the clearance between the oil pan and the steering gear housing exceeds approx.130 mm {5.12 in}.