Idle Speed Adjustment
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Perform ENGINE TUNE-UP PREPARATION .
- Verify that the idle speed is within the specification.
- If not within the specification, adjust the idle speed by turning the AAS.
CAUTION:- The TAS is set at the factory and must not be adjusted. Any adjustment will negatively affect the engine performance.
Specification
- 750-850 (800 +/- 50) RPM
- Disconnect the jumper wire.
- Press "CLEAR" to clear previously selected items.
- Disconnect the SST (WDS or equivalent).