Engine coolant temperature compensation inspection
WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the WDS or equivalent to DLC-2.
- Select following PIDs.
- ECT
- RPM
- Verify that the engine is in cold condition, then start the engine.
- Verify that the engine speed decreases as the engine warms up.
- If the engine speed does not decrease or decreases slowly, carry out the following:
- ECT sensor inspection
- IAC valve inspection
- If the engine speed does not decrease or decreases slowly, carry out the following: