LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 485 (Interior Trim) >> Ventilator Grille Removal/Installation >> Center

Ventilator Grille Removal/Installation: Center

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the ashtray panel. (See CONSOLE REMOVAL/INSTALLATION .)
  2. Remove the center panel module installation screws and bolts, then pull the center panel module outward. (See CENTER PANEL MODULE REMOVAL/INSTALLATION .)
  3. Remove the screws.
  4. Pull the ventilator grille outward and detach clips A and B.
  5. Detach tab C and remove the ventilator grille.
  6. Install in the reverse order of removal.
    Fig 1: Removing Ventilator Grille
    G03703232Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals