Glove Compartment Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Pull the stay damper in the direction shown in the figure, and detach the connecting part between the glove compartment and the stay damper.

Fig 1: Detaching Connecting Part Between Glove Compartment And Stay Damper
Courtesy of MAZDA MOTORS CORP.
Press the stopper in and remove it.
Lower the glove compartment.
Detach the clips from the dashboard and remove the glove compartment.
Install in the reverse order of removal.

Fig 2: Removing Glove Compartment
Courtesy of MAZDA MOTORS CORP.