LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 482 (Seats) >> Seat Warmer Switch Removal/Installation

Seat Warmer Switch Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the upper panel. (See CONSOLE REMOVAL/INSTALLATION .)
  3. Disconnect the connector.
  4. Squeeze the tabs of seat warmer switch and pull it outward to remove it.
  5. Install in the reverse order of removal.
    Fig 1: Squeezing Tabs Of Seat Warmer Switch And Removing It
    G03703122Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals