LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 482 (Seats) >> Power Seat Switch Inspection >> Lumbar Support Switch

Lumbar Support Switch

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the lumbar support switch connector.
  2. Verify that the continuity between the lumbar support switch terminals is as indicated in the table.
    • If not as indicated in the table, replace the lumbar support switch.
    Fig 1: Connector Terminal Continuity Reference Chart
    G03703120Courtesy of MAZDA MOTORS CORP.
    Fig 2: Measuring Continuity Between Lumbar Support Switch Terminals
    G03703121Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals