LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 479 (Body Panels) >> Fuel-Filler Lid Removal/Installation

Fuel-Filler Lid Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bolts.
  2. Remove the fuel-filler lid.
  3. Install in the reverse order of removal.
  4. Adjust the fuel-filler lid. (See FUEL-FILLER LID ADJUSTMENT .)
    Fig 1: Removing & Installing Fuel-Filler Lid With Torque Specification
    G03703021Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals