LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 475 (Seat Belt System) >> Seat Belt Inspection >> Load Limiter Retractor

Load Limiter Retractor

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • When the load limiter operates, the belt and anchor rub against each other strongly leaving wear tracks. If the seat belt is used in this state, the seat belt will not function as its full capability and there is the possibility of serious injury to passengers. Be sure to replace the seat belt once the load limiter operates.
  1. If the vehicle has been subjected to a shock in an accident, pull the belt from the retractor and confirm that there are no wear tracks (the load limiter has not operated) by visually inspecting and feeling the belt.
    • If there is any malfunction, replace the seat belt.
    Fig 1: Pulling Belt From Load Limiter Retractor
    G03702952Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals