Activating System

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Connect passenger-side air bag module connector. Install glove box. Connect lower clockspring connector. Install steering column covers. Connect seat belt pretensioner connectors. Install right- and left-side lower B-pillar trim panels. Connect side air bag module connectors. Connect negative battery cable. Perform system operation check. See SYSTEM OPERATION CHECK .

Fig 1: Locating Driver-side Air Bag Module Connectors

Courtesy of MAZDA MOTORS CORP.

Fig 2: Locating Passenger-side Air Bag Module Connectors

Courtesy of MAZDA MOTORS CORP.

Fig 3: Locating Side Air Bag Module Connectors

Courtesy of MAZDA MOTORS CORP.

Fig 4: Locating Seat Belt Pretensioner Connectors

Courtesy of MAZDA MOTORS CORP.