Diagnostic procedure
WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
NO 1 DIAGNOSTIC PROCEDURE
| STEP | INSPECTION | ACTION | |
|---|---|---|---|
| 1 | INSPECT PID/DATA IN EPS CONTROL MODULE
|
Yes | EPS warning light circuit malfunction in the instrument cluster. Inspect the instrument cluster. (See INSTRUMENT CLUSTER INPUT/OUTPUT CHECK MODE .) |
| No | EPS control module malfunction. Replace the EPS control module. (See EPS CONTROL MODULE REMOVAL/INSTALLATION .) |
||