LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 466 (Automatic Transmission [Shift Mechanism]) >> Selector Lever Removal/Installation >> Manual Shaft Lever Component Removal Note

Manual Shaft Lever Component Removal Note

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mark the manual shaft lever component as shown in the figure.
  2. Remove the manual shaft lever component installation nut.
    Fig 1: Removing Manual Shaft Lever Component
    G03702709Courtesy of MAZDA MOTORS CORP.