Pilot Bearing, Oil Seal Installation Note

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Install the pilot bearing using the SSTs.
NOTE:
- Bearing outer diameter: 20 mm {0.787 in}
- Press-in depth:
  11.5-12.25 mm {0.453-0.482 in}
Fig 1: Installing Pilot Bearing And Oil Seal Using SST
Courtesy of MAZDA MOTORS CORP.
Install a new oil seal using the SSTs .