Clutch Switch Inspection

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Remove the engine cover.
Remove the battery cover.
Disconnect the negative battery cable.
Disconnect the clutch switch connector.
Verify continuity as indicated in the table.

Fig 1: Clutch Switch Connector Continuity Checking Reference Table
Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Clutch Switch Connector Terminals
Courtesy of MAZDA MOTORS CORP.
- If there is any malfunction, replace the clutch switch.