LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Air Bag System) >> Removal & Installation >> Passenger-Side Air Bag Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM. Remove glove box. Disconnect connector and remove passenger-side air bag module retaining bolts. See Fig 1. Remove passenger-side air bag module.
  2. To install, reverse removal procedure. Tighten air bag module retaining bolts to specification. See TORQUE SPECIFICATIONS . After installation, activate air bag system. See ACTIVATING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
Fig 1: Removing Passenger-side Air Bag Module
G98A14100Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals