DTC 2: SAS Control Unit
WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, see AIR BAG SAFETY PRECAUTIONS . If DTC 2 is retrieved, SAS control unit has malfunctioned. Replacement of SAS control unit is required. Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Replace SAS control unit and go to next step. See SAS CONTROL UNIT under REMOVAL & INSTALLATION.
- Reinstall all components and reconnect all connectors. Activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .