Lack of hydraulic pressure inspection
WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
- With the engine stopped and the vacuum amount at 0 kPa {0 mmHg, 0 inHg}
if the pedal force and fluid pressure correlation is within the specification, the system is normal.LACK OF HYDRAULIC PRESSURE INSPECTION - STANDARD FLUID PRESSURE SPECIFICATIONS
Pedal force (N {kgf, lbf}) Fluid pressure (kPa {kgf/cm2 , psi}) 200 {20.4, 44.9} 606 {6.18, 87.9} or more