LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 455 (Differential) >> Rear Differential Disassembly >> Rear Bearing Disassembly Note

Rear Bearing Disassembly Note

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • The drive pinion could be damaged if it falls off. Support the drive pinion with your hand when removing the rear bearing.
  1. Remove the rear bearing using the SST  and a press.
    Fig 1: Removing Rear Bearing Using SST And Press
    G03702296Courtesy of MAZDA MOTORS CORP.