LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 454 (Drive Shaft) >> Rear Drive Shaft Disassembly/Assembly >> Outer Ring Disassembly Note

Outer Ring Disassembly Note

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place an alignment mark on the drive shaft and the outer ring.
  2. Remove the outer ring.
    Fig 1: Placing Alignment Mark On Drive Shaft And Outer Ring
    G03702268Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals