LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 453 (Rear Axle) >> Wheel Hub, Rear Knuckle Removal/Installation >> Wheel Bearing Installation Note

Wheel Bearing Installation Note

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new wheel bearing using the SSTs. 
    Fig 1: Installing Wheel Bearing Using SST
    G03702254Courtesy of MAZDA MOTORS CORP.