LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 453 (Rear Axle) >> Wheel Hub, Rear Knuckle Removal/Installation >> Brake Caliper Component Removal Note

Brake Caliper Component Removal Note

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Suspend the brake caliper component using a cable.
    Fig 1: Suspending Brake Caliper Component Using Cable
    G03702240Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals