LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 450 (Rear Suspension System) >> Rear Shock Absorber And Coil Spring Removal/Installation >> Collar Installation Note

Collar Installation Note

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the collar so that the tapered side is facing downward as shown in the figure.
    Fig 1: Installing The Collar Facing Downward
    G03702186Courtesy of MAZDA MOTORS CORP.