LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Air Bag System) >> Disabling & Activating Air Bag System >> Activating System >> For Diagnostics (Driver & Passenger AIR Bags)

For Diagnostics (Driver & Passenger AIR Bags)

WARNING: This page is about a different car, the 2002 Mazda B4000, 2002 Mazda B3000, and 2002 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Wait at least one minute for back-up power supply to deplete stored energy. Remove air bag simulator from clockspring connector. Install driver-side air bag module. Remove air bag simulator from passenger-side air bag vehicle harness connector. Install passenger-side air bag module.
  2. Reconnect negative battery cable. Prove out system. See PROVE OUT SYSTEM  under DIAGNOSTICS. Reprogram pre-set radio frequencies and set clock.
scientia non olet · About LEMON Manuals