LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 449 (Front Suspension System) >> Front Suspension Tower Bar Removal/Installation >> Plate Installation Note

Plate Installation Note

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the plates with the identification marks facing upward.
    Fig 1: Installing Plates With Identification Marks Facing Upward
    G03702181Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals