LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 444 (Starting System) >> Starter Inspection >> Starter Inner Parts Inspection >> Magnetic switch

Magnetic switch

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect for continuity between terminals S and M using an ohmmeter.
    • If there is no continuity, replace the magnetic switch.
    Fig 1: Measuring Continuity Between Terminals S And M
    G03702026Courtesy of MAZDA MOTORS CORP.
  2. Inspect for continuity between terminal S and the body using an ohmmeter.
    • If there is no continuity, replace the magnetic switch.
    Fig 2: Measuring Continuity Between Terminal S And The Body
    G03702027Courtesy of MAZDA MOTORS CORP.
  3. Verify that there is no continuity between terminals M and B using an ohmmeter.
    • If there is continuity, replace the magnetic switch.
    Fig 3: Measuring Continuity Between Terminals B And M
    G03702028Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals