LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Air Bag System) >> Disposal Procedures >> On-Vehicle Deployment (Scrapped Vehicle) >> Side AIR Bag

Side AIR Bag

WARNING: This page is about a different car, the 2002 Mazda Millenia. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before deploying air bag, inspect operating condition of Deployment Tool (49 H066 002). See INSPECTING DEPLOYMENT TOOL  under DISPOSAL PROCEDURES. Ensure vehicle is outside and away from other vehicles and people. Turn ignition off. Disconnect negative battery cable.
  2. Disconnect side air bag module connector. See Figure. Connect deployment tool connector adapter to side air bag connector. Connect deployment tool connector to adapter harness. Close all doors and windows. Connect Red deployment tool clip to battery positive terminal. Connect Black deployment tool clip to battery negative terminal. Verify deployment tool Red light is on.
  3. Ensure all persons are at least 20 feet from vehicle. Press deployment tool activation switch to deploy air bag. Because of heat generated from air bag deployment, wait at least 15 minutes before handling deployed air bag module.
scientia non olet · About LEMON Manuals