Activating System

WARNING: This page is about a different car, the 2002 Mazda Millenia. However, it is still accessible from the selected car via links, so may be relevant.

Connect SAS control module. Connect left and right side air bag module. Connect passenger-side air bag module. Install glove box. Connect clockspring. Connect negative battery cable. Perform SYSTEM OPERATION CHECK .

Fig 1: Locating Driver-side Air Bag Clockspring Connectors

Courtesy of MAZDA MOTORS CORP.

Fig 2: Locating Passenger-side Air Bag Module Connector

Courtesy of MAZDA MOTORS CORP.

Fig 3: Locating Side Air Bag Module Connector

Courtesy of MAZDA MOTORS CORP.