Rollover Valve: Removal

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Squeeze the tabs on the quick release connector and disconnect the fuel hose from the fuel pipe.

Fig 1: Disconnecting Quick Release Connector
Courtesy of MAZDA MOTORS CORP.
Cover the disconnected quick release connector and fuel pipe with vinyl sheeting or a similar material to prevent it from being scratched or contaminated with foreign material.
NOTE:
- Take care not to damage or soil the fuel hose.
Fig 2: Take Care Not To Damage Or Soil The Fuel Hose Connectors
Courtesy of MAZDA MOTORS CORP.