LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 438 (Engine Mechanical [Intake-Air System]) >> Intake-Air System Removal/Installation >> Air Cleaner Insulator Installation Note

Air Cleaner Insulator Installation Note

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Temporarily tighten nuts.
  2. Temporarily tighten bolts.
  3. Tighten the nuts to the specified torque.
  4. Tighten the bolts to the specified torque.
    Fig 1: Installing Air Cleaner Insulator
    G03701851Courtesy of MAZDA MOTORS CORP.

    Tightening torque 

    1. 7.8-10.8 N.m {79-111 kgf.cm, 69.0-95.6 in.lbf}