LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 435 (Engine Mechanical (Service Information)) >> Rear Oil Seal Replacement >> Counterweight Removal Note

Counterweight Removal Note

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the locknut by locking the counterweight against rotation using the SST. 
    Fig 1: Removing Locknut By Locking Counterweight Against Rotation Using SST
    G03701799Courtesy of MAZDA MOTORS CORP.
  2. Remove the counterweight using the SST. 
  3. Remove the SST. 
    Fig 2: Removing SST
    G03701800Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals