LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 428 (Interior Trim) >> C-Pillar Trim Removal/Installation

C-Pillar Trim Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear side trim. (See REAR SIDE TRIM REMOVAL/INSTALLATION .)
  2. Turn the seaming welt over.
  3. Remove the upper anchor of the second-row seat belt. (See SECOND-ROW SEAT BELT REMOVAL/INSTALLATION .)
  4. Disengage clips A and clip B using a fastener remover.
  5. Pull the C-pillar trim upward, then disengage hook C from the body, and remove the C-pillar trim.
    Fig 1: Removing C-Pillar Trim
    G03701330Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals