Fuel-Filler Lid Adjustment

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Measure the gap and height between the fuel-filler lid and the body.
- If not as specified, loosen the fuel-filler lid installation bolts, and reposition the fuel-filler lid.
Fig 1: Measuring Gap And Height Between Fuel-Filler Lid And Body
Courtesy of MAZDA MOTORS CORP.

Clearance
1. a: 3.0-5.0 mm {0.119-0.196 in}
2. b: -1.5-0.5 mm {-0.059-0.019 in}
Tighten the bolts.