LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 422 (Seat Belt System) >> Seat Belt Inspection >> ELR

Seat Belt Inspection: ELR

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that the belt can be pulled out smoothly, and that it moves smoothly when wound.
    • If not as specified, replace the seat belt.
  2. Verify that the retractor locks when the belt is quickly pulled.
    • If not as specified, replace the seat belt.
    3. Fig 1: Inspecting Seat Belt
    G03700962Courtesy of MAZDA MOTORS CORP.
  3. Remove the retractor. (See FRONT SEAT BELT REMOVAL/INSTALLATION [STANDARD DEPLOYMENT CONTROL SYSTEM] , FRONT SEAT BELT REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM] .) (See SECOND-ROW SEAT BELT REMOVAL/INSTALLATION .) (See THIRD-ROW SEAT BELT REMOVAL/INSTALLATION .)
  4. Make sure that the seat belt does not lock when the retractor is tilted slowly up to 15°  from the mounted position and locks when the retractor is tilted 40° or more  .
    • If not as specified, replace the seat belt.
    Fig 2: Inspecting Seat Belt Retractor
    G03700963Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals