Driver's Seat

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the buckle switch connector.
Inspect for continuity between the buckle switch terminals using an ohmmeter.
- If not as specified, replace the front buckle.
Fig 1: Inspecting Buckle Switch Continuity (Standard Deployment Control System) (1 Of 2)
Courtesy of MAZDA MOTORS CORP.

Fig 2: Inspecting Buckle Switch Continuity (Standard Deployment Control System) (2 Of 2)
Courtesy of MAZDA MOTORS CORP.