LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 421 (Air Bag System) >> Air Bag Module And Pre-TENSIONER Seat Belt Deployment Procedures (Standard Deployment Control System) >> Deployment Procedure for Outside of Vehicle >> Notes

Deployment Procedure for Outside of Vehicle: Notes

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect the SST  (Deployment tool). (See INSPECTION OF SST (DEPLOYMENT TOOL) .)
  2. Turn the ignition switch to LOCK position.
  3. Disconnect the negative battery cable and wait for 1min or more.
  4. Follow the appropriate procedure for deploying the driver-side air bag module, passenger-side air bag module, side air bag module, curtain air bag module, or pre-tensioner seat belt.
scientia non olet · About LEMON Manuals