LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 418 (Control System (HVAC)) >> Rear Airflow Mode And Air Mix Actuator Removal/Installation

Rear Airflow Mode And Air Mix Actuator Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the rear side trim (RH). (See REAR SIDE TRIM REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the table.
    Fig 1: Removing Airflow Mode And Air Mix Actuator
    G03700751Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.