No.11 Shift Point Is High Or Low

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

SHIFT POINT IS HIGH OR LOW - DESCRIPTION AND POSSIBLE CAUSES

11	Shift point is high or low
DESCRIPTION	Shift point considerably different from automatic shift diagram. Shift delays when accelerating. Shift occurs quickly when accelerating and engine speed does not increase.
POSSIBLE CAUSE	If the transaxle does not shift abnormally, there is a malfunction of input signal to TP sensor, input/turbine speed sensor, or VSS. If engine speed is high or low regardless that shifting is normal, inspect tachometer. Verify that output signal of TP sensor changes linearly. NOTE: Before following troubleshooting steps, make sure that Automatic Transaxle On-Board Diagnostic and Automatic Transaxle Basic Inspection are conducted.

Shift point is high or low

DESCRIPTION

Shift point considerably different from automatic shift diagram.
Shift delays when accelerating.
Shift occurs quickly when accelerating and engine speed does not increase.

POSSIBLE CAUSE

If the transaxle does not shift abnormally, there is a malfunction of input signal to TP sensor, input/turbine speed sensor, or VSS.
If engine speed is high or low regardless that shifting is normal, inspect tachometer.
Verify that output signal of TP sensor changes linearly.
NOTE:
- Before following troubleshooting steps, make sure that Automatic Transaxle On-Board Diagnostic and Automatic Transaxle Basic Inspection are conducted.