Stop Pin (Vehicle with rear disc brake) Assembly Note
WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
- Install the secondary piston with the piston hole facing the stop pin.
- Install the new O-ring onto the stop pin.
- Install the stop pin.
Tightening torque
- 6.9-9.8 N.m {71-99 kgf.cm, 62-86 in.lbf}
- Push and release the secondary piston assembly to verify that it is held by the stop pin.