Pedal-to-floor Clearance Inspection

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

Start the engine and verify that the distance from the floor panel to the pedal pad center is as specified when the pedal is depressed.
- If the distance is less than specified, check for the air in brake system.
Specification
1. 113 mm {4.45 in} min.
Fig 1: Inspecting Pedal-To-Floor Clearance
Courtesy of MAZDA MOTORS CORP.