LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 409 (Drive Shaft) >> Joint Shaft Removal/Installation >> Wheel Hub, Steering Knuckle, Drive Shaft and Joint Shaft Installation Note

Wheel Hub, Steering Knuckle, Drive Shaft and Joint Shaft Installation Note

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the joint shaft with the end-gap of a new clip facing upward.
    CAUTION:
    • The sharp edges of the joint shaft can slice or puncture the oil seal. Be careful when installing the joint shaft to the transaxle.
scientia non olet · About LEMON Manuals