LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 402 (Starting System) >> Starter Inspection >> Starter Inner Parts Inspection >> Magnetic switch

Magnetic switch

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect for continuity between terminals S and M using an ohmmeter.
    • If there is no continuity, replace the magnetic switch.
    Fig 1: Inspecting For Continuity Between Terminals S And M Using An Ohmmeter
    G03699984Courtesy of MAZDA MOTORS CORP.
  2. Inspect for continuity between terminal S and the body using an ohmmeter.
    • If there is no continuity, replace the magnetic switch.
    Fig 2: Inspecting Continuity Between Terminal S And Body Using An Ohmmeter
    G03699985Courtesy of MAZDA MOTORS CORP.
  3. Verify that there is no continuity between terminals M and B using an ohmmeter.
    • If there is continuity, replace the magnetic switch.
    Fig 3: Verifying There Is No Continuity Between Terminals M And B Using An Ohmmeter
    G03699986Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals