Connector Identification

WARNING: This page is about a different car, the 2002 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Transaxle connector No. 1 is identified as C1 in wiring diagram. Transaxle connector No. 2 is identified as C2 in wiring diagram.

Fig 1: Identifying Coupler Connector (8-pin) Terminals

G00139416

Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Coupler Connector (10-pin) Terminals

G00139417

Courtesy of MAZDA MOTORS CORP.

Fig 3: TCM Harness Connector Terminal Identification

G00139409

Courtesy of MAZDA MOTORS CORP.

Fig 4: Identifying Transaxle Range Switch Component Connector Terminals

G00139393

Courtesy of MAZDA MOTORS CORP.

Fig 5: Identifying Transaxle Connector No. 1 Terminals

G00131468

Courtesy of MAZDA MOTORS CORP.

Fig 6: Identifying Transaxle Connector No. 2 Terminals

G00139397

Courtesy of MAZDA MOTORS CORP.