LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2002 >> Tribute LX, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 390 (Instrumentation/Driver Info) >> Instrument Cluster Inspection >> Tachometer >> Using the SSTs (WDS or equivalent)

Using the SSTs (WDS or equivalent)

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • If the engine speed exceeds the allowable range, the engine could be damaged. Therefore, when inspecting the tachometer, do not allow the engine speed to exceed the allowable range indication on the tachometer.
  1. Connect the SSTs  (WDS or equivalent) to the vehicle DLC-2 16-pin connector.
  2. Access and monitor PIDs by SSTs  (WDS or equivalent).
    Fig 1: Locating DLC-2 Connector
    G03645745Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals