Poor Acceleration
WARNING: This page is about a different car, the 2002 Mazda Millenia and 2001 Mazda Millenia. However, it is still accessible from the selected car via links, so may be relevant.
Possible cause: burnt or slipping clutch, low line pressure, TP sensor malfunction, TFT sensor malfunction, VSS malfunction, input/turbine speed sensor malfunction, shift solenoids sticking, pressure control solenoid sticking, faulty control valve body, poor sensor ground, poor body ground, short or open in wiring, faulty contact at sensor connector(s), PCM or input/output component failure and/or torque converter malfunction.