Front Antenna Feeder Inspection

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.

Verify that there is no continuity between the front antenna feeder terminals A and B using an ohmmeter.
Inspect for continuity between the front antenna feeder terminals using an ohmmeter.
- If not as specified, replace the instrument panel harness.
  
  Fig 1: Front Antenna Feeder Continuity Table
  Courtesy of MAZDA MOTORS CORP.
  
  Fig 2: Front Antenna Feeder Connector Terminals
  Courtesy of MAZDA MOTORS CORP.